What is Axial Fan? (Axial fan)

Description of axial fans in simple language:

Auxial fans have the highest air displacement and the lowest static pressure, whether on suction or on the mouth, so to select a fan, two cartes should be considered cfm Or the displacement of air per cubic meter per hour and static pressure in terms of pascal, so for places where there is no channeling or pressure drop and now consider the correct selection of fans is one of the most important parts for energy consumption in the residential and commercial office production unit we introduce with several different types of fan styles.

Ocial fans or radial or grasshopper fans have the highest air displacement.

Then there are the forward and backward jet fan sets, and the high pressure side fans, the Rothes Blowers, the compressor sets, which have very, very high pressures but very little air displacement.

So if we define a biopressive scale, if we define the highest air displacement is related to the oxyal fans, and the lowest air displacement is related to the compressors, and the swallowex is the lowest fan pressure is related to the oxyal fans and the highest fan pressure is related to the compressors.

Axial fans have different styles based on the angle of the butterflies choosing CFM The sound decibels and the distance they receive are done, and we are trying to define the highest air displacement on the axial fan sets, but on their sound sets we define different styles so that we can move the pressure upwards and balance the displacement of the air with the angles of the propeller where they move upwards again with the angles of the propeller. Design the pressures to move a little upwards And on the other hand, control the sound with a series of other sets, the different styles that are chosen to be jet fan itself, i.e. two axial types, usually chosen from 500 laps to 3,000 rounds.

Oxyal fans that are 500 rounds have higher sizes, practically used for cooling towers (cooling towers) are chosen for poultry farms, then to smaller sizes to the fans used for parking lots.

We choose the fans for the tunnels that have a higher round, and because they have a lot more static pressure and air launcher.

For parking spaces, the choice is on the same 1,400 laps, eventually smaller sizes of 2,800 laps, so that there’s no more noise, but electromotors. F300 or F400 is installed on them to withstand the fire time temperature, so electromotors are different if there is no fire problem, there is no need for systems f300or f400 To be used, and if there is a risk of fire in the area, the electromoders that are selected based on 1 hour to 2 hours depending on its standard temperature at 300 degrees or 400 degrees have the power to work and not stop and their coils are not damaged and there is no problem for them, the tunnels between the roads are a jet fan in the tunnel that is allowed through the tunnel. We don’t have a exit, so the choice we make is that the air launcher should be high and heavy, enter the air and throw it 20 meters away. And the next fan also throws to 20 meters away, they just pass each other the air and get out of the tunnel, so we looked at the different styles of oxyal fans and the choice is because they usually have less energy consumption and the displacement has very high air, very low static pressure and occupies less space, practically less space for them. Other things we have.