Industrial coolers 18000
With Pars Saeed blue model cellulose pad with more than 24 years of brilliant experience in the Iranian ventilation industry
Industrial Cooler | Buy Industrial Cooler Industrial Cooler | Industrial cooler price 18000 | Industrial Cooler 18000
Industrial Cooler 24000 | Industrial cooler
20000 | Buy Industrial Cooler 24000 | Buy Industrial Cooler 18000 | Industrial cooler price 24000 | Buy 20000 industrial air conditioners
Pars Saeed Ventilation Industries Company is proud to bring conditions by serving the top quality of its best-selling product with the special sale of 18,000 industrial air conditioners, so that it can serve more of the hard-working producers and craftsmen of this land.
18000 industrial air conditioner, as its name implies, has been designed and produced for industrial uses such as (factories, commercial complexes and greenhouses, etc.) by this company in 24000 size with dimensions (height 220, length 200, width 80). The best type of calculation for each cooler is the space of 2000 cubic meters in the absence of a heat source.
Advantages of industrial air conditioners 18000
1- Low noise compared to the power of coolers and similar coolers.
2- Very low power consumption approximately one quarter of the same coolers (up to 5.4 amps)
3- ISO 9001
4- Ce certificate of Europe
5- Galvanized sheet material
6- Electrostatic paint coating
7- Having 2 years warranty and 5 years after-sales service.
8- The type of transmission of power is direct.
9- Using cellulose pad in this device instead of air conditioner straw to cool the air as much as possible is useful, which itself,
There are three very important advantages:
A) Having an evaporation level of at least 4 to 5 times as much as cooler straws due to having an uneven surface and waves for cooling and high cooling.
B) 18000 industrial air conditioner has 5 times more durability than ordinary air conditioner straws, ie if the useful life of an ordinary air conditioner straw is calculated as 1 year, the useful life of cellulose pad is estimated at 5 years.
C) After a while, due to the lime in the water and the dust in the air, the cooler lids become saturated and lose their efficiency and do not have the necessary coolness and must be replaced.
Are but ….
Cellulose pads will be more efficient after a period of use and the formation of a layer of lime and dust on their surface due to the higher evaporation surface.
* It is possible to create additional capabilities on industrial air conditioners at the request of the customer
a) Special temperature adjustment device required (thermostat).
b) Installation of inverter device for controlling the electro motor speed (single phase input to three phases and three phases to three phases).
c) Installing wheels for easy handling.
d) Installing gratings on cellulosic pads for more security and durable pads.
y) Humidifier with Japanese nozzles to lower the temperature in greenhouses
Industrial Coolers | Buy Industrial Cooler Industrial Cooler
Figure 2. Industrial coolers of 18000 Pars Saeed Ventilation Industries Company for the esteemed Bita Agro-industry Complex
Some of the executive examples of 18000 industrial air conditionersby Pars Saeed Air Conditioning Company mentioned the following:
- Pars Isotope Company – Atomic Energy Organization of Iran
- Dear Caspian Plastic Aria Company
- Mahan Airplane Hangar/ Mahan Sanat Afarin Co.
- Salamat Fish Meat Company
- Orchid Restaurants complex of Chalus road and Shahriar
- Ahwaz SugarCane Development Company
- Dear Company for SugarCane Development and Ancillary Industries
- Covenant Exhaust Factories
- Alinia Wood Industries Company
- Ahwaz Esale Sanat Company
- Sharia Warehouses Complex
- Dear Kish Airlines
- Husseiniyah Ansar al-Hussein
- Dear Ready To Gourmet (Elite)
- Alborz Province General Directorate of Finance
- Dear Herbie Pharmed Company
- Kerman Steel Company
- Permanent Exhibition of Harmony Interior Decoration
- Dear Bahar Machine Company
- Shabrang Fam Company
- Permanent Exhibition of Sofa & Decoration Sane
- Dear Mattress Roya Company
- Dear Kimia Polymer Company
- Derrin Mushroom Complex
- Dear Beech Mushroom Complex
- Dear Kabul Metal Company
- Dear Gamma Tinner Company
- Beata Mushroom Complex
- Dear TavanSavan Company
- Hajj and Pilgrimage Organization
- Ahwaz SugarCane Development Company
- Kish Trading Complex
- Dear Hoor Sepehr Saman Co.
- Apadana Reception Hall
Figure 3.Industrial coolers 18000 Pars Saeed Air Conditioning Company in the place of permanent exhibition of Harmony interior decoration
What is the reason for offering inverter on 18000 industrial air conditioner?
During industrial air conditioners, our sales managers also offer inverters to their customers
Because by installing an inverter and electrical panel on an industrial air conditioner, you can inject a heavier refrigerant into the environment by controlling the speed of the device.
And decibels lowered the sound and reduced energy consumption dramatically.
Does the 18000 industrial air conditioner of Pars Saeed Air Conditioning Company need ducting to be installed?
Industrial coolers 18000 Pars Saeed Air Conditioning Company, because the type of fans installed in it is axial and has a cross-sectional area of 120 mm in diameter,
It will introduce a high volume of incoming air to a capacity of 40,000 cubic meters with low pressure and speed into your shed
So that your shed operates as a super channel.
Therefore, this type of coolers do not need to be channeled, which itself is one of the notable advantages of this product, which is used to prevent any pressure drops resulting from air movement in the duct and increase the efficiency, but also directly connects its air outlet mouth to the hall.
For sheds, it is also recommended that these industrial air conditioners be installed directly in the vent located in the outer wall of the shed.
There is no need for a knee. Because any kind of channeling reduces the efficiency of the device due to the pressure drop it creates.
Due to the high air volume and low pressure and speed of this airflow, the operator’s performance is easily provided in the desired environment.
The company also proposes to install 18,000 industrial air conditioners at least 4 meters high in the walls so that no inconvenience to the operators.