In general, we have two models of foley belt centrifuge, one model and one model that their difference is in the placement of their bearings in the model of one of the bearings is exposed to airflow, but in the foley belt centrifuges the model of both bearings are mounted on one side of the fan on the base and are not exposed to airflow.
This design creates a series of special features for us that we will continue to fully address…
Introduction of this product:
Singelbquard Foley Belt Model Centrifuges
In this model, the centrifuge is used by The Beckward Single propeller, which has exactly the same diagrams and functions as the Beckward butterflies.
The connection between the propeller and the electro motor is in the form of a belt foley
And we’ll be able to adjust the round by the foley and belt system.
This centrifuge model is produced in 15 sizes, ranging from 250 to 1250 mm in diameter and which has an extraordinary performance range and can create an air volume between 2000 and 70,000 cubic meters per hour with static pressure between 200 and 3200 Pascal.
Apart from this, out belt foley centrifuges are normally designed and manufactured for operation under harsh conditions that can function at high temperatures and with high humidity conditions and other harsh conditions, which is completely related to the design of this product, i.e. the placement of bearings and electro motors.